Terms and Policies
Now the drive is ready to go. You’ll also use the cable that came with the optical drive to connect it to the motherboard (align the red stripe for “pin 1”) and plug the other end into the drive. Connect the audio for the optical drive. The drive fits in the front of the case, and you may have to pop out a faceplate to make room for it. Again, set the jumpers correctly. Slide it in and screw it into place, making sure that it’s aligned with the front of the case. Install the optical drive next. Just as with the hard drive, bangkok condo for sale the room on nut bts you can use any available connector from the power supply.
The CPU box will contain a manual that tells you how to do it. To install our heat sink, all we had to do was put it in place, cinch it down with flanges on either side and lock it with a cam. The heat sink will contain either a heat sink sticker or heat sink grease to use when mounting it on the CPU. Follow the instructions closely to install it.
You’ll also need to connect some wires to the motherboard. It needs to sit about a quarter of an inch (6.4 millimeters) away from the case’s surface so that none of its connectors touch the case. Now you can put in the motherboard. The case already has a hole cut in it for the plate, so you just need to put in the plate and press it until it clicks into place. Your motherboard should have come with a face plate for its back connectors.
You’ll need to use the RAM with the correct pin configuration that will match your motherboard. If your motherboard is using a specialty RAM configuration (normally to improve performance), make sure the RAM you buy matches its requirements. Make sure you know which kind of motherboard you’re using before you buy RAM so that they match up. Some motherboards support RAM in pairs of memory sticks and others may require you to add three sticks at a time.
Local parts retailer — Any big city will have a number of smaller, local shops selling parts. Look in the Yellow Pages or online. But before we start building, we need to say one thing about static electricity. The people working at a shop like this can often answer lots of questions, and they may also be willing to help you if your machine does not work after you assemble it. This is the fun part. Now that you have your parts, it’s time to build.
If the case doesn’t come with a power supply, you’ll need to choose one. Three hundred watts are enough for low-power machines, but if you’re building a gaming machine with multiple video cards or a machine with lots of disks, you may want to consider something bigger. Make sure its connectors match the motherboard. There are tools online that help you estimate how much power your computer will need based on the components you’re including in the machine.
